Export inspection process for wooden crates

Export inspection process for wooden crates

    1.Confirm export wooden packaging Box The length of the sealing tape extending to the side of the box is 6-8cm, there should be no secondary sealing marks, the adhesive tape should be straight, and the adhesive paper slit is jagged; p>

2. Check for leaks on the top and bottom of the export wooden crates Paper, sealing nails, bottom exposed film bags, unpacking guide pages, whether there is a wrong cover, the sealing adhesive paper does not float well.

3. Confirm that the wooden packaging box cover is lifted, the long side flap should be aligned and closed, and the sealing nail needs to be buckled evenly.

4. Domestic sales machine: 50-inch and 50-inch size, LCD machine package machine does not play PP tape. If the customer has different requirements, it will still be executed according to the customer's requirements.

5. PP belt tightness The two bonding faces are less than 2mm, and the two bonding distances are greater than 30mm±2mm.

Inspection of the appearance of wooden packaging boxes for export

1. Confirm that the printed contents of wooden packaging boxes should be clear and correct, the appearance should be clean, there should be no painting and damage, and whether the materials are The product is the same as the requirements, whether the label is stored on the carton, whether there is a FRONT/front logo for the indicator screen;

2. Confirm that the handle and the snap hole on the wooden box are properly opened. ;

3. Confirm that the series of information required on the wooden crates is consistent with the actual (weight, accurate to 0.1kg, calculated weight deviation σw = | measured weight - identification weight | / logo weight. The width and height readings are accurate to 1mm, and the package measurement size - logo size ≤ 8mm)

4. Check the contents of the barcode, the scan value and its paste position, the production date is correct (no advance is allowed), the sticker cannot be 歪, the position should be positive, skew standard ≤ 15 °

5. Check whether the energy efficiency sticker is consistent with the actual machine. (Scanning energy efficiency two-dimensional code check electrical measurement data and login in the effective identification management query is consistent).